If you’ve been reading my blog for a while, you might recall Butterick 4790. It’s a reprint of a 1952 pattern, 6015, often referred to as the “walk-away” dress, nicknamed because it was claimed that you could start the pattern after breakfast, and walk away in it by lunch.
Unless, after stitching down the first dart, your thread snaps and winds itself around an internal component, bringing the whole enterprise to a halt.
I have had a sewing machine for 15+ years (currently a Singer 5160), and this has never happened before. I mean, sure, thread snaps all the time, but to see it wound around the doohickey that controls the take-up lever; well, that’s new to me. There’s no thread in my way, and I could ignore it and rethread the machine, but when I turn the hand-wheel, the tension feels off. I’m afraid of it either seizing, or snapping the snapped thread further and winding it around even more internal components.
The screws that hold the machine together are recessed. Recessed farther than my screwdrivers will reach. So, in lieu of paying a shop take apart the machine simply to unwind a piece of thread, I went to Home Depot and bought a longer screwdriver. I undid the five screws on the back of the machine. The screw on the right, near the power supply. The screw on the left, near the needle/presser foot. After all that, I was able to remove one small piece of the housing, but still couldn’t reach the offending thread. I don’t want to cause any further damage, so I guess I’ll call around and see if I can find a shop that will cut me a deal on what I know is a quick “repair.” (One local shop has a $95 diagnostic charge!)
In the meantime, I am unable to “walk-away” in my dress. And the sewing portion of my Halloween costuming is on brief hiatus (public thanks to Big Red for offering up her machine while mine is under the weather).